Series Cost made in China replacement parts in Kharkiv Ukraine Double Conical Screw Mixer in CheEPT al with top quality

Series Cost made in China  replacement parts  in Kharkiv Ukraine Double Conical Screw Mixer in CheEPT al with top quality

We – EPG Team the biggest gearbox & motors , couplings and gears manufacturing facility in China with 5 different branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Series Double Conical Screw Mixer in Chemical

The PerMix PNA series Conical Screw Mixer is a batch mixing gear utilised extensively in mixing programs that demand mild mixing with nominal merchandise distortion, nominal heat technology, and extremely correct mixing homogeneity. Given that it was first developed much more than sixty many years back, it has been acknowledged as a great remedy for the items which is delicate, heat delicate or tending to segregate.
Due to the cause the PerMix Conical Screw Mixer uses the gravity to create the substantial downward massflow, it saves energy in comparison with a horizontal mixer.

These Conical Screw Mixers are also featured with no contamination to the solution during the mixing, owing to the fact that the shaft sealing & bearing is earlier mentioned the wor ept location, therefore no make contact with with the item.

HOW IT Operates:
Inside of of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, 3 screws in accordance to specified application) rotating by its possess axle which is in parallel to and close to the wall of the cone vessel. The mixing screw lifts the merchandise around it from base to the leading, and then the powder falls down because of to the gravity, causing a convective mixing.

At the identical time, the screw is supported by an orbital arm and is rotating around the middle of the cone like a planetary, so that the powders in each corner of the cone can be combined by the screw, and a 3-dimentional mixing overall performance occurs in the entire cone.

– Feeding & Discharging
A variety of feeding & discharging strategies obtainable.
– Screw Kind
We provide single screw, double screw and triple screw to give different mixing depth.
– Generate method
Push program by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, and so on.
– Building Materials and Complete
We are capable to provide our PVR Mixers with make contact with part to be created in Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless metal, Hastelloy, and so on. Finish of inside and external end can be boring polished, a hundred and eighty grit polished (food quality), or mirror polished. For abrasive supplies we offer you hardened steel as the speak to element.
– Spray nozzle
Liquid can be additional into the powder by spray nozzles on the prime.
– Heating/Cooling jacket
Jacketed trough for heating/cooling procedure
– Vacuum drying & deaerating
PNA Conical Screw Mixers can be developed to a vacuum mixer dryer for vacuum drying & deaerating or for interior pressure wor ept for particular purposes.

– Animal Care
Animal Feeds, Rooster Fattening Feed, Fish Meals, Mineral Feed, Pet Foods, Poultry Feed, Rabbit Feed, Veterinary Drugs
– Chemicals
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Prescription drugs, Pigments, Plastic Additives, Resins, Reliable Lubricants
– Day-to-day Treatment
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
– Building Components
Ornamental Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composite

Specs of Conical Screw Mixer:

Product Overall volume
Wor ept quantity
Power (*)
RPM Dia.
H, complete peak (**)
Inlet (***)
Outlet (****)
PNA-two hundred 200 a hundred and twenty 2.2+.37 140/two 888 1557 140 230 500
PNA-three hundred 300 180 2.2+.37 a hundred and forty/2 990 1722 one hundred eighty 230 550
PNA-500 five hundred three hundred three+.55 140/2 1156 1991 two hundred 230 600
PNA-800 800 480 4+.55 60/two 1492 2256 250 300 950
PNA-a thousand 1000 600 four+.fifty five 60/two 1600 2432 300 three hundred 1200
PNA-1500 1500 900 5.5+.75 sixty/2 1780 2725 300 300 1350
PNA-2000 2000 1200 5.5+.seventy five sixty/two 1948 3001 350 350 1500
PNA-2500 2500 1500 7.5+1.five sixty/2 2062 3571 350 350 1800
PNA-3000 3000 1800 seven.5+1.five 60/two 2175 3207 350 350 2100
PNA-4000 4000 2400 11+2.2 40/two 2435 4571 four hundred four hundred 2500
PNA-5000 5000 3000 15+2.two 40/two 2578 4260 400 four hundred 3000
PNA-6000 6000 3600 eighteen.5+3 forty/two 2715 4470 four hundred 400 3500
PNA-8000 8000 4800 22+three forty/1.three 2792 5000 400 450 3800
PNA-10000 ten thousand 6000 30+4 40/1.three 3000 5240 500 450 4300

1. (*) (**) (***) (****): Adjustments are accessible in accordance to the customer’s request.
two. Customized dimensions accessible as for each request
three. All technical specs and illustrations are as correct as is fairly achievable, but they are not binding.
four. PerMix reserves the right to modify the design and style with out recognize.

Device Particulars:


Our Clients:

Far more Items by PerMix:

PerMix Benefits:


Q: What is your cost amount in contrast with European suppliers and local Chinese suppliers?
A: Dependent on the equipment type and dimension, our price tag level is 30%-60% much less than the European suppliers and 5-fifteen% higher than the huge neighborhood suppliers.

Q: Are you capable to give tailor-produced layout and generation for the mixers?
A: Sure, in truth a lot more than 50 percent of our mixers are tailor produced, which is one of our robust points.

Q: Are you capable to design and create other processing gear?
A: We are open to talk about about it.

Q: Can you give equipment to OEM customers, indicating to label their manufacturers on the equipment.
A: Of course we are doing it a lot. We have a number of OEM partners in the United states.

Q: Do you have agent network out of China?
A: Yes we do have agents but only in some nations, for instance in Usa, Germany, Poland, Spain, Denmark, Turkey, Argentina, and so on. We are even now loo ept for a lot more brokers because we feel to work with agents is the best way to do company.

Q: What is your shipping and delivery direct time of the mixing equipment.
A: Dependent on the dimensions and amount of customization, but usually it is from 6-14 months.

Q: How do you pack and ship the mixing equipment?
A: For devices don’t demand entire container loading, we will pack them in picket situation. For FCL (entire container loading) cargo, we will just wrap the devices in plastic films and correct them in the container. The cargo can be both by air or by sea

The use of original tools manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our firm and the shown substitute areas contained herein are not sponsored, accepted, or manufactured by the OEM.

Series Cost made in China  replacement parts  in Kharkiv Ukraine Double Conical Screw Mixer in CheEPT al with top quality

Series Cost made in China  replacement parts  in Kharkiv Ukraine Double Conical Screw Mixer in CheEPT al with top quality